A standard repair fee, specific to the product, is charged for any product that is repaired outside of the warranty period. Repairs on products out of warranty also carry a day warranty, effective the day that you receive the item after repair.
You can request in writing that Ergotron appropriately dispose of the product for you. A fee may apply for this service as designated by local law. Non-Defective Products: You are notified if, after examining and testing a returned product, Ergotron concludes that the product is not defective. The product is returned to you and you would be responsible for the freight charges associated with the return. Except as expressly set forth in this Limited Warranty and to the greatest extent allowed by law, Ergotron makes no other representations, warranties or conditions, express or implied, including any implied representations, warranties or conditions of merchantability, fitness for a particular purpose, non-infringement, and non-interference.
Ergotron does not warrant that your use of the Ergotron product will be uninterrupted or error free. Any implied warranties that may be imposed by law are limited in duration to the Limited Warranty period, to the greatest extent allowed by law.
Some states or countries do not allow a limitation on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages for consumer products. In such states or countries, some exclusions or limitations of this Limited Warranty may not apply to you. This Limited Warranty is subject to change without notification.
This Limited Warranty is available only to the original end consumer and is non-transferable. Powered by electric motor, this desk will go up or down with the press of a button. Pneumatic mechanism moves the desk up and down by pressing a handle till you reach the perfect height. Crank desk adjusts desk height up or down by turning crank handle clockwise or counter clockwise.
Pinset desk moves in incremental heights of 1" by adjusting pins. Suitable only when an occasional change in seat height is needed. Product ID: Highlights Sit-stand workstation : Converts your desk so that you can sit or stand while working 23" height adjustment : Maximum possible height adjustment is 23" 24" screen size : Supports two monitors with up to 24" in screen size maximum outside width of display is Tilt Pivot Kit can be installed above or below the bow to add 30 degree tilt to displays.
This pivot kit is compatible with a variety of dual-display products, including WorkFit and Neo-Flex. Ergotorn includes a handle for ease of moving the WorkFit-S from a sitting to a standing position. Keep a tablet computer, phone, cup of java or task-related items where they can be quickly accessed.
Ergotron keeps a tablet computer or task-related items where they can be quickly accessed. Includes a handle for ease of moving the WorkFit-S from a sitting to a standing position. Ergotron is designed for larger keyboards and allows the user to install this keyboard tray centered or to the right and left of the WorkFit-S workstations for ergonomic comfort. Tray dimensions are 0. This keyboard tray could also be installed further out from the monitor to create extra viewing space.
Deep keyboard tray in black is designed for WorkFit Workstations for larger and deeper keyboards. Mounting hardware is included. It allows the WorkFit workstations to be used in L-shaped desks. Includes mounting hardware. ErgoDirect ED30 is a 30" wide x Clicking a mouse with one hand hundreds of times a day for 10, 20, 30 years causes serious discomfort and pain. This keyboard tray is designed for a mouse for left hand and another mouse for right hand.
This is recommended to devide the number of clicks between two hands and not to put too much stress on one hand. Ergotron is an anti-fatigue mat that makes standing comfortable while working.
It is a tool to get rid of a sedentary lifestyle. Combine Ergotron comfortable and durable mat with a Sit-Stand Workstation so you enjoy even more of the health benefits of standing during your day.
Measures 24" x 18" 61 x 46 cm. Combine Ergotron Anti-Fatigue, comfortable and durable mat with a Sit-Stand Workstation so you enjoy even more of the health benefits of standing during your day. Measures 36" x 24" 91 x 61 cm. Compatible with displays up to 22" screen size maximum outside width of display is Ergotron Double-Hinged Bow allows you to turn screens inward to customize the viewing parabola, or you can turn a screen outward to share a view with others.
Ergotron mounts your CPU to any vertical surface and frees up space. Ergotron mounts most computers to a variety of surfaces: directly to a wall, or under a desk, or to Ergotron Wall Track, Command Post or select Carts. Ergotron mini-coax RGB and paired video wire construction delivers superior signal quality. Gold plated connectors and gold plated copper contacts ensure excellent conductivity. Ergotron delivers the high performance, high bandwidth needed for today's digital video displays.
Gold plated contacts ensure excellent conductivity. Ergotron is recommended for use with WorkFit Workstations, which may require extra long cables in order to span between standing and sitting heights. Ergotron has cord that is 15' 4. Includes brackets for easy, secure attachment to Ergotron carts.
Strong metal housing has two mounting holes which makes it super easy to install the unit under desktop or on the wall. Ergotron organizes and routes equipment wiring. It provides a safe work environment by removing free hanging cables. Ergotron supports your wrists to maintain a neutral position, providing you with a healthy computing experience.
It is completely RoHS compliant. Ergotron has convenient storage for a mouse. It saves space while keeping mouse secured. Save time and money by allowing the experts to integrate and to inspect, adjust and manage cables for any of installed Ergotron WorkFit product. Description Convert your desktop into a dual monitor sit-stand workstation with Ergotron Technical Drawing.
Benefits Premium Ergonomics When sitting, lower your keyboard below desktop height to proper ergonomic position Independent monitor screen adjustment Easily and simultaneously lift keyboard and monitor to your height for unsurpassed comfort Counterbalanced adjustment points using patented Constant Force technology allow instantaneous, tool-free re-positioning while you work For Computer Users Improve your energy and productivity by standing or sitting as you work, and then switch positions whenever you choose.
This work style encourages healthy movement throughout the day Promote fitness and comfort as you compute, reducing potential back and neck pain by adding movement into your work routine in a truly ergonomic workstation Double your view and move it too.
With two monitors you can save time by using multiple applications at once - eliminate toggling back and forth between documents and programs Burn more calories by choosing to stand for periods of your work-day; periodic standing also promotes greater bone density and better sleep at night.
Frequently Asked Questions Question: What does a grommet mount mean? Answer: With grommet mount, you will be able to attach your workstation to the desk through a hole drilled in the worksurface.
Question: Can this workstation be installed at the corner of a 90 degree L-shaped desk? Is the Floor Mat strong enough to roll the chair over it while sitting? Is it easy to roll the chair over the Floor Mat? Answer: You will want to keep in mind the keyboard tray is 27" wide.
You will want to be able to clear that on the corners when moving to the sitting position. So if you are able to do that then this WorkFit will work. The floor mats are strong enough to have chairs roll over them. They have memory form like material that will form back to original shape once the chair is removed. The mat has slanted edges so that it is easy to roll over it.
Question: Does the basic unit include a keyboard tray and mouse tray? Answer: Yes, the base unit comes with a keyboard tray and a mouse tray.
Review this product. How much is. I have only been using this for an hour now and I am going to like it. Yes No. Easy to install, works great. Perfect distance between keyboard and monitors. I've been using this with a treadmill and walking at work, and it's perfectly stable. Only one had a problem, which was solved in good order. Again, thanks.
This fits the purpose better than expected. When standing it is steady and firm. Adjusting the tension is easy. Whether sitting of standing the computer is accessible conveniently. I would recommend this to anyone who needs to be able to use a computer but cannot sit all day. Warranty All Ergotron and OmniMount durable products will remain free of defects in material and workmanship for a period of five years from the date of receipt of the product, subject to any exclusions and limitations as set forth below.
Exclusive Remedy Warranty Repair: In the event that any Ergotron equipment becomes defective in material or workmanship during the warranty period, Ergotron will determine with you if the product defect is covered under warranty. For products that are not covered under warranty, Ergotron offers you the following options: You may upgrade to a newer, functionally equivalent product at a normal MSR list price Ergotron will return the product to you You can request in writing that Ergotron appropriately dispose of the product for you.
A fee may apply for this service as designated by local law Non-Defective Products: You are notified if, after examining and testing a returned product, Ergotron concludes that the product is not defective. Warranty Disclaimer Except as expressly set forth in this Limited Warranty and to the greatest extent allowed by law, Ergotron makes no other representations, warranties or conditions, express or implied, including any implied representations, warranties or conditions of merchantability, fitness for a particular purpose, non-infringement, and non-interference.
Ergotron devices are not intended to cure, treat, mitigate or prevent any disease. Warranty Transferability This Limited Warranty is available only to the original end consumer and is non-transferable.
This lets you enjoy your monitor without any wiggle or play in the arm. The white version of the arm is powder coated with a white paint. This feature lets you apply a small amount of force to adjust the monitor. In practice this works very well. Moving the screen around is smooth and effortless. This is especially important when dealing with large monitors. They can be difficult to maneuver when you have to support their entire weight by yourself. With the springs assisting you, adjusting heavy monitors is a breeze.
I did not experience any drooping or sagging of my monitor either, unlike with cheaper monitor arms that I have used in the past. With its Especially when it comes to monitor arms for large monitors. The LX gives about 2 more inches 5 cm of both extension and vertical lift. The HX sacrifices some of that reach in favor of more stiffness and rigidity. For large monitors this is essential.
In terms of the degrees of freedom that you can move the monitor, they are all there. And I am quite picky in terms of ergonomics. However, there are some scenarios in which you can run into the limitations of this arm. For example, when using a Cintiq drawing tablet. Because of the limited vertical range of the arm, it is not possible to lower the drawing tablet all the way down to your desk. People do report the monitor arm being more than sturdy enough to draw on.
Instead of lowering the tablet to the desk, they raise their chair up further or tilt the drawing tablet forward a bit more.
This limitation is still something to keep in mind if you want to use this monitor arm for drawing tablets. The Ergotron HX comes with two different options for mounting the monitor arm to your desk. The most popular method is a clamp, but there is also a grommet mount included. The clamp left and the grommet mount right. The clamp is pretty straightforward.
It clamps on the edge of your desk and holds the rest of the arm in place. It is easy to reposition along the edge of your desk if you are not happy with its position.
The other option to attach the monitor arm to the desk is to use the included grommet mount. It attaches through a hole 0. Some desks come with a grommet hole by default.
This is typically used for guiding cables through. If your desk does not have a grommet hole, you need to drill it first. As you can imagine, drilling a hole in your desk is not ideal. When you want to reposition the monitor arm, you would have to drill a new hole and cover up the old one. One benefit of the grommet mount is that you can install the arm in the center of a desk or table, instead of being limited to the edges.
This gives extra mounting options that can be useful on large desks or tables. The grommet mount also has the advantage that it works with desks up to 2. Alternatively, if you want a monitor arm for large monitors that mounts to the wall, you can look at the Ergotron HX.
This is basically the same arm as the one in this review, but it comes with a wall-mount instead. The cable management on the Ergotron HX consists of two velcro cable straps at the top and a cable channel with plastic cover at the bottom.
This setup works very well and I did not encounter any problems with it. I prefer this cable management system over that of cheaper monitor arms. These often come with plastic clips that come loose when a cable gets pulled. With the HX, there are no such issues. Also included with the arm are two extra velcro straps that you can use as spares.
But then again, this product is supposed to last for at least a decade. Maybe by that time I will find the need to replace the straps. The Ergotron HX works well with almost any monitor, provided that it weighs between 20 to 42 lbs 9 to 19 kg. If the weight of the monitor does not fall within this range, then the springs of the arm will provide too much or not enough force. When checking the weight of your monitor, make sure to look up the weight without the stand.
In order to mount the monitor on the arm, the stand needs to be removed. So there is no need to include the weight of the stand in your calculations. This can make a big difference, because stands for large monitors tend to be heavy. With the included brackets, you can mount almost any monitor to the arm. Keep in mind that if you want to use this monitor arm for the Samsung CRG9 , you will need to use the included circular wall mount bracket that is included with the monitor.
So make sure you have it at hand during installation. When using this monitor arm with Cintiq drawing tablets, it is not possible to rest the screen on the desk surface. The arm does not articulate far enough down for that. This is not necessarily an issue, as the arm itself is stable enough to draw on. Raising your chair higher and tilting the monitor further forward is often enough to keep good posture. Using the Ergotron HX with iMacs is possible too and looks particularly good with the white version of the arm.
One monitor that does not work with the HX, despite the specifications suggesting that it does, is the Samsung Odyssey G9. The swivel joint at the top of the arm is not strong enough to hold the monitor up. My theory is that the R curvature of the screen causes the monitor to extend too far forwards. As a result, the monitor applies too much force on the joint. This is because the center of mass on curved monitors is located further outwards than that of regular monitors. This improved pivot is significantly stronger than the existing one and is easily swapped out.
It does only offer 15 degrees of upwards tilt instead of the 70 degrees of the original , but that should not be an issue for most users. An earlier version of this review mentioned that the Ergotron HX has no black color option and referred to the Humanscale M10 , which does offer this color.
As of this year, Ergotron now offers the HX in black as well. Aside from the color, it is identical to the white version in this review. The model number of the single monitor desk-mounted version of the black Ergotron HX is , whereas the black dual monitor version is labeled 6 So here is a quick comparison. The difference between the LX and HX is mainly in their maneuverability and weight limits. Approximately where the LX reaches its limit, the HX takes over.
The LX is excellent if you have a relatively lightweight monitor that can benefit from more mobility, whereas the HX is a more stable monitor arm for big monitors. The Ergotron HX is one of the best monitor arms for large monitors that you can buy at the moment. It comes at a price, but for that you do get a high-end product with excellent build quality. In combination with the 10 year warranty, you can be assured that you have a monitor arm that can handle almost anything you throw at it for a very long time.
Tim is the founder of clevercreations. He is passionate about building, repairing, and anything DIY related. When he is not busy writing about these topics, you can find him in his workshop. View all posts. Please update this article to note that Ergotron now offers a separate part for heavier monitors such as the Samsung G9 which has a beefier spring tension to accommodate the extra force applied by the large curvature.
I believe the price for the hinge upgrade is approximately 60 — 70 dollars US.
0コメント