Disk platter removal tool

So I broke out an old Seagate 3. The tools performed just as advertised and by the 3rd platter I was already releasing the tool from the platter with a steady and fluid motion. They should be easy to use for any data recovery professional.

This could allow an engineer or tech to inadvertently get the platters in the wrong order. There has always been a huge gap in the quality and price of the tools we need to make data recovery affordable. Note: Before you can use this tool very well, you need to have some experience of platter replacement or have used familiar platter replacement products or you need more practice on the tool; Remember to work with hard drive platter replacement tool, you should have clean room environment or at least one qualified clean bench.

We are not responsible for any damage done directly or indirectly due to improper use of tools. Q: How to contact us? Please feel free to email us sales hddzone. Note: Send clear photos of your PCB both sides to us will make everything easier! Mail with attachments. A: Yes! They are different board versions, but they are compatible! We will ship randomly. Please leave a message if you want a special revision, thank you!

A: No! We can't list them all, but they are compatible! I have some loose platters lying around cause they're neat. Is the data from them considered safely destroyed? From a security standpoint, no. It is still theoretically possible to recover the data from them.

It would be a lot of work to recover it, but probably still possible. The only way to truly destroy the data is to physically destroy the platters. That said, unless that data is worth a lot of money, it is effectively destroyed. Not Helpful 1 Helpful 1. Bad sectors are in the surface of the platter. Dismounting the drive is completely useless. You can't repair that bad sectors, unless with a low level format and that action erases the info.

If you can access to the info, copy it! If you can't, there is no other option but to go to a recovery data center. Not Helpful 0 Helpful 0. How do I recover my data?

Find the same donor hard drive with same model and same speed and do the platter swap. Even if the PCB board and head are damaged, you can still recover data.

Not Helpful 0 Helpful 3. Include your email address to get a message when this question is answered. By using this service, some information may be shared with YouTube.

To remove the platters you might have to remove the head assembly. Helpful 16 Not Helpful 5. Helpful 13 Not Helpful 4.

This procedure is not for logically erased data. This procedure is for physically inoperable drives with intact data. Helpful 11 Not Helpful 3. Helpful 8 Not Helpful 2. When swapping the platters be very careful with the head! Make sure the head is parked before you attempt to remove the platters. Helpful 12 Not Helpful 7.

Do your homework. Look at photos of the internals of a hard disk drive before you open one up. Helpful 6 Not Helpful 7. Helpful 0 Not Helpful 0. Freezing the hard drive can cause condensation on the platters which can lead to the platters being damaged by the heads when the HDD drive is powered.

Submit a Tip All tip submissions are carefully reviewed before being published. This will void any existing warranty. Helpful 8 Not Helpful 5. Hard Drives are assembled in hermetically-sealed clean rooms, free of any dust. A single speck of foreign material introduced onto a platter will destroy the drive most of the time.